Tips for Using Wago 221 Connectors
-
Preparation:
- Strip the Wires: Remove about 11-13 mm (0.43-0.51 inches) of insulation from the wire ends. Make sure the stripped part is clean and free of damage.
- Check Wire Type: Wago 221 connectors work with solid, stranded, and fine-stranded wires.
-
-
Open the Lever:
- Lift the Orange Lever: Use your thumb or a small tool to lift the orange lever to a 90-degree angle. This opens the clamping unit, making it ready to accept a wire.
-
-
Insert the Wire:
- Insert Stripped End: Push the stripped end of the wire into the connector hole until it meets resistance. The wire should be visible through the clear housing, ensuring it's fully inserted.
-
-
Close the Lever:
- Push Down the Lever: Once the wire is inserted, push the orange lever back down to the closed position. You should feel a slight click, indicating the wire is securely clamped.
-
-
Check the Connection:
- Visual Check: Through the transparent housing, verify that the wire is properly clamped and fully inserted. Ensure no copper is exposed outside the connector.
-
Repeat for Multiple Wires:
- Multiple Connections: If you need to connect multiple wires, repeat the above steps for each wire. Wago 221 connectors can accommodate several wires in one connector (depending on the model, usually up to 5).
-
Reusing the Connectors:
- Easy Reuse: If you need to change or rearrange the wires, simply lift the lever to release the wire and reinsert as needed. Wago 221 connectors can be reused multiple times.
-
Safety Check:
- Double-Check Connections: Always double-check that all levers are fully closed and all wires are securely clamped before powering up your circuit.
Additional Tips:
- Compatibility: Wago 221 connectors are suitable for various applications, including lighting, appliances, and junction boxes.
- Compact Design: Their compact design makes them ideal for tight spaces.
- Secure and Reliable: These connectors provide a strong, secure connection and are less likely to loosen over time compared to traditional wire nuts.
Using Wago 221 connectors can make your electrical projects faster, easier, and safer! Happy wiring!
